TV LOGIC | LUM-318G | 31.1″ True 4K

$20,225.00 $20,000.00

-1% New

LUM-318G is a 31.1″ native 4K resolution(4096×2160)monitor with a maximum luminance of 850nit

Stokta kalmasa da sipariş verilebilir

wws Bsmproject Yardıma mı ihtiyacınız var? WhatsApp aracılığıyla bize ulaşın
Qty:
Karşılaştır

The LUM-318G is a 31.1″ native 4K resolution(4096×2160)monitor with a maximum luminance of 850nit, the contrast ratio of 1450:1, wide colour gamut and wide viewing angle. Equipped with 4 BNCs (2×12G-SDI + 2×3G-SDI) and HDMI2.0 interface, it supports various video formats to 4K/60p through single-link 12G-SDI, Quad 3G-SDI and HDMI 2.0. In addition to various professional features such as Waveform monitor and Vectorscope, the LUM-318G provides HDR emulation function with HDR EOTFs of PQ, HLG and SLog3.More camera-specific HDR logs and gamuts will be supported by a firmware update.


MONITOR | TV LOGIC | LUM-318G | 31.1″ | True 4K | Monitor | with 12G-SDI | HDMI 2.0 | and Enhanced Luminance

Audio Level Meter Display

Displays the level of the embedded sound signal together with the video signal input through the terminal such as SDI or HDMI.

Blue Only / Mono

Red and Green channels are not used and only Blue or Monochrome channel is used to display the screen. This function is used to adjust the colour tones (tones and saturation) of the screen using the SMPTE Color Bar. For example, after displaying the Blue channel, adjust the Color (or Saturation) and Tint (or Hue) so that the original Magenta and Cyan are of the same brightness, and the original Gray and Blue are of the same brightness.

H/V Delay

Allows you to check the Blanking area and synchronize signals by displaying the horizontal and vertical intervals in the centre of the screen.

Marker

Displays various kinds of aspect ratios on the screen. Wide range of markers and security areas are available with line colour and curtain transparency selection. A User Marker is available if any of the standard markers fits your requirements.

Time Code Display

Displays the Timecode information on the screen.

User Aspect

Adjusts the Width /Height display ratio.

Various Scan Modes

Controls the size of the image. Overscan: Extra area around the four edges of the image that may not be seen reliably by the viewer. Underscan: Constrains the size of the image so the monitor shows everything the camera is seeing. 1:1 pixel: Displays the original image resolution without scaling to match a certain resolution or an aspect ratio.

Waveform/Vector Scope

Waveform Y: Displays the Luma(Y’), Cb, Cr component of the input signal into waveform.
Vector Scope: Displays the colour components ‘B-Y’ and ‘R-Y’of the input signals onto the X-Y axis

Sayfamızda birçok markanın çeşitli ürünlerini bulabilirsiniz. Aynı zamanda en uygun fiyatlara ve güncel kampanyalara ve çok cazip ürün fırsatlarına göz atabilirsiniz. Bsmproject.net, broadcast ürün mağazasındaki tüm ürünler için online alışveriş hizmeti vermektedir.

Sosyal Medya Hesaplarımızdan Bizi Takip Edebilirsiniz.

Facebook | Instagram | Twitter | Youtube | Linkedin

0★

Rating

  • 5★ 0
  • 4★ 0
  • 3★ 0
  • 2★ 0
  • 1★ 0

İncelemeler

Henüz inceleme yapılmadı.

“TV LOGIC | LUM-318G | 31.1″ True 4K” için yorum yapan ilk kişi siz olun

E-posta hesabınız yayımlanmayacak. Gerekli alanlar * ile işaretlenmişlerdir

TVLogic

TVLogic modellerini içeren sayfamızda TVLogic markasının çeşitli ürünleri bulabilirsiniz. Aynı zamanda en uygun TVLogic fiyatlarına ve güncel TVLogic kampanyalarına ve çok cazip ürün fırsatlarına göz atabilirsiniz. Bsmproject.net, broadcast ürün mağazasındaki tüm ürünler için online alışveriş hizmeti vermektedir.