SWIT | S-2070 | Chip Array Led

New generation LED technology

S-2070 is a new light of SWIT Chip Array LED family, with smaller size and lower consumption for hand HD camcorders.

The new generation LED technology, Chip Array LED, integrates the LEDs into a chip with high brightness output but in smaller size, and the most remarkable, it offers a equally spread, soft, non-glaring light, similar to the traditional Halogen bulb light.

13W Power Consumption, 70W Blub Equivalent
S-2070 requires only 13W power consumption but can output bright light equivalents to an 70W halogen bulb. The illuminance is 800 Lux at 1 meter distance and 1 meter scale.

Compact Size
S-2070 is compact size designed, smaller than SWIT S-2041 and S-2050 Chip Array LED light, and more suitable to use on small camcorders.

60° Wider Beam Angle

Equally spread lights, no visible beam edge

LIGHTS | SWIT | S-2070 | Chip Array | LED | On-Camera Light

The traditional LED lights use lens to converge and get a higher brightness, but dropped down quickly around, which will generate a visible lighting border in the image.
In comparison, the S-2070 Chip Array LED generates a 60° wider beam angle, equally spread from the center to edge, and suitable for HD shooting.

LIGHTS | SWIT | S-2070 | Chip Array | LED | On-Camera Light

3200K/5000K/5600K Colour Temperature
The S-2070 LED has 5000K color temperature and also equipped with a 5600K (Daylight) and a 3200K (Tungsten) color temperature filter. You can switch the colour temperature easily.

6-17V Wide Voltage Power Supply
The S-2070 accepts 6-17V wide voltage input, so you can get power from 14.4V V-mount/Gold Mount batteries or 7.2V DV batteries.

The light package goes with a D-tap to pole-tap cable (S-7104), to plug into the DC-IN port of S-2070 and get power from D-tap power output sockets, such as batteries, battery plates, or camera handle.

You can also select SWIT pole-tap to pole-tap DC cable (S-7108) to get power from pole-tap DC adaptors.
By installing a particular DV battery plate, you can directly mount a 7.2V DV battery onto the rear of the S-2070 light.

Interchangeable DV plates
You can power the S-2070 by most popular DV batteries, via the easy interchangeable DV battery plates. Swit supply the following DV plates as optional extras:
Model of Plates Compatible batteries

• S-7004F:SONY NP-F970/770, SWIT S-8972,S-8970,S-8770
• S-7004U:SONY BP-U60/U30, SWIT S-8U63
• S-7004D:Panasonic CGA-D54, VW-VBD58, SWIT S-8D62, S-8D58
• S-7004B:Panasonic VW-VBG6, SWIT S-8BG6
• S-7004J:JVC BN-V428U, SWIT S-8428
• S-7004V:JVC BN-VF823, SWIT S-8823
• S-7004i:SSL-JVC50, SWIT S-8i50
• S-7004C:Canon BP-945/970G, SWIT S-8845, S-8945
• S-7004E:Canon LP-E6, SWIT S-8PE6

Power by Special Compact Battery
If you want a compact battery power solution, you may choose SWIT S-8040 Li-ion battery to instead of the DV plates and DV batteries.
The S-8040 is specially used for SWIT S-2041 and S-2070 lights, with 7.2V, 21Wh/3Ah capacity, and can run nearly 1 hour and 40 minutes on S-2070.
The S-8040 has a 4-level power indicators and a pole-tap charging input socket. You can use SWIT portable Pole-tap charger S-3010D to charger S-8040.

Dimmer control
S-2070 has a dimmer controller to adjust the light output from 10%-100%. The color temperature will not change during the dimmer controlling

Easy Installation

Both cold-shoe and screw

S-2070 offers a dual purpose installation base, that can be fixed to camera via both cold shoe and 1/4” screw head.

[vc_separator]

Sayfamızda birçok markanın çeşitli ürünlerini bulabilirsiniz. Aynı zamanda en uygun fiyatlara ve güncel kampanyalara ve çok cazip ürün fırsatlarına göz atabilirsiniz. Bsmproject.net, broadcast ürün mağazasındaki tüm ürünler için online alışveriş hizmeti vermektedir.